KR1002 Equivalent To HIROSE DF19 alternatives connector
DF19 connector, SMT Wafer, 1mm pitch connector series, widely use in LCD, LVDS cable etc.
| Pitch | 1.00mm |
| Circuits: | 8-30 pin (DF19 standard counts: 8, 14, 20, 30) |
| Current: | 1A |
| Voltage: | 100V |
KR1002 Equivalent To HIROSE DF19 alternatives connector
Select Components
Download
General Specifaction
| Material: | PA66/UL94/PA6T/Phosphor Bronze |
| Insulation O.D | 0.8mm Max |
| Withstanding Voltage: | 500V AC/ minute |
| Temperature Range: | -40℃～+105℃ |
| Contact Resistance: | 30mΩ Max |
| Insulation Resistance: | 500MΩ Min |
| Product Plating | Gold flash/Tin over Nickel |
Overview
KR1002 series connectors are KONNRA’s equivalent to the HIROSE DF19 – a 1.00mm pitch, single-row, low-profile wire-to-board connector built for LVDS display links and other high-speed differential signals. HIROSE describes the DF19 as the de facto standard for LCD panel connections on panels under 12 inches, and this series is designed to that interface. It is supplied in the standard DF19 position counts – 8, 14, 20 and 30 – with a right-angle SMT wafer, a wire housing and a crimp terminal, rated 1A at AWG #28 with a 100V rating. Connector sets, pre-crimped cable assemblies and adapter harnesses are available from a single manufacturing source.
Advantages
- Matched to the DF19 display interface
1.00mm pitch, single row, with a right-angle SMT wafer that keeps the board-mounted height low. Built for LVDS display links and other high-speed differential signalling – the interface HIROSE developed the DF19 around.
- Standard DF19 position counts
8, 14, 20 and 30, so an existing board footprint and harness layout carry over. Other counts within the 8-30 range on request.
- Current rating matched to the original series
Rated 1A with an AWG #28 conductor – the same figure HIROSE publishes for the DF19 at that gauge. The rating follows your conductor: HIROSE publishes 0.9A at AWG #30, 0.8A at #32, 0.5A at #36 and 0.5A for FPC terminations, so confirm the applicable figure for your actual wire.
- A complete component set from one manufacturer
Right-angle SMT wafer, wire housing and crimp terminal, plus finished single-ended, same-side and adapter cable assemblies from KONNRA’s wiring harness division. For DF19 designs that use the FPC or micro-coaxial termination path, contact us to confirm availability.
- Documented and independently verified
Engineering drawing, product specification and package specification are published, with dimensional and electrical verification available from a CNAS-accredited laboratory, 45+ sets of precision testing instruments, and 95% of production processes under full-line CCD visual inspection.