List of industry standards for commonly used connectors

1. Quick plug terminal type.

GB 17196 Flat quick-connect terminals for copper wire connections.

UL 310 Flat quick connect terminals for copper conductors.

IEC 61210 Flat quick connect terminals for connecting copper conductors.

DIN 46249 Requirements and test methods for fast connection terminal blocks without pre-insulation.

 

2. Ground ring type.

GB15286 General technical conditions for terminal connectors.

JB 2436.1 Copper crimp terminals for conductors Part 1: Copper crimp terminals for conductors 0.5 to 6.0 mm2.

UL 486A-B terminal block

UL486E Equipment terminal blocks for connecting aluminum and/or copper conductors.

JIS C2805 copper wire crimp terminals.

3. Universal connectorclass.

GB 34989 Connector safety requirements and testing.

UL 1977 Connector assemblies for data transmission, signaling and high currents.

Housing requirements for connector assemblies.

IEC 61984 connector safety requirements and testing.

RAST 2.5 connector, standard pitch 2.5 mm.

RAST 5.0 connector with standard pitch of 5.0 mm.

 

4. Lug (terminal) type.

GB 13140.1 Low-voltage circuit connecting devices for household and similar purposes Part 1: General requirements.

“Low-voltage circuit connecting devices for household and similar purposes – Part 1: General requirements”.

UL 1059 terminal blocks and accessories.

 

5. Automotive connectors.

QC/T 1067 Connectors for automotive wiring harnesses and electrical equipment Part 1: Definitions, test methods and general performance requirements.

USCAR 2 automotive electronic connector performance standard.

USCAR 12 Connector Assembly Design Guide.

USCAR 21 Terminal Crimp Performance Specification.

Ergonomic Guidelines for USCAR 25 Electronic Connector Assembly.

USCAR 37 High Voltage Connector Performance.

GB/T 20234.1 Electric vehicle conductive charging connection devices Part 1: General requirements.

GB/T 20234.2 Electric vehicle conductive charging connection device Part 2: AC charging interface.

GB/T 20234.2 Electric vehicle conductive charging connection device Part 3: DC charging interface.

 

6. Safety requirement category of connector.

GB/T 16935 Insulation coordination of low-voltage system equipment Part 1: Principles, requirements and tests.

Insulation coordination of equipment within low voltage systems Part 1: Principles, requirements and tests.

 

7. Permanent connection type.

GB 18290.2 Solderless connections Part 2 General requirements, test methods and usage guidelines for solderless crimp connections.

GB 18290.3 Solderless connections Part 3 General requirements, test methods and usage guidelines for contactable insulation displacement connections.

GB 18290.4 Solderless connections Part 4 General requirements, test methods and usage guidelines for non-contact insulation displacement connections.

GB 18290.5 Solderless connections Part 5: General requirements, test methods and usage guidelines for solderless press-fit connections.

IEC60352-2 Solderless connections Part 2 General requirements, test methods and usage guidelines for solderless crimp connections.

IEC60352-3 Solderless connections Part 3 General requirements, test methods and guidance for use of contactable insulation displacement connections.

IEC60352-4 Solderless connections Part 4 General requirements, test methods and instructions for use of non-contact insulation displacement connections.

Solderless connections Part 5: General requirements, test methods and usage guidelines for solderless press-fit connections.

 

8. Test evaluation category.

Global Impact Assessment 364 Environmental testing procedures and environmental ratings for electronic connectors.

Global Impact Assessment 364-1000 Connector Environmental Test Assessment Method.

Environmental Assessment 364-1004 Method for evaluating the current load carrying capacity of connectors.

Global Impact Assessment 364-1005 Methods for Connector Fretting Corrosion.