JST & Molex Connector Alternatives, Engineered to Drop In
Wire-to-board and wire-to-wire replacements built to the same footprint, same mating interface, same crimp window — validated in a CNAS-accredited lab and shipped from three manufacturing bases. No PCB redesign. No requalification loop.
100% reliability tested
NDA-protected drawings


KR2005 terminal

KR3000 · 3.00 mm
JST ⇄ Molex — find your replacement in seconds
Pitch, mating interface and PCB footprint matched. Full drawing pack available on request.
| Original Series | Pitch | KONNRA Replacement | Matched Interface | |
|---|---|---|---|---|
![]() |
JST XH | 2.50 mm | KR2501 | Locking wire-to-board · Molex 2510 / 5045 footprint |
![]() |
JST PH | 2.00 mm | KR2001 / KR2005 | PicoBlade 51021 class · single & dual row |
![]() |
JST PA | 2.00 mm | KR2014 | TPA wire-to-board · Molex 35507 / 35362 class |
![]() |
JST XA | 2.50 mm | KR2516 | TPA wire-to-board · 2.50 mm pitch |
![]() |
JST SM | 2.50 mm | KR2507 | Wire-to-wire · friction lock, 2.50 mm |
![]() |
Molex DuraClik | 2.00 mm | KR2017 | TPA W2B · PCB header & crimp housing |
![]() |
Molex Clik-Mate | 1.50 mm | KR1507 | Top-entry W2B · single & dual row |
![]() |
Molex Micro-Fit | 3.00 mm | KR3000 | Dual-row power W2B / W2W · 3.00 mm |
![]() |
Molex Mini-SPOX | 2.50 mm | KR2500 | 2.50 mm W2B · DIP & SMT wafer |
![]() |
Molex SL | 2.54 mm | KR2541 | Modular 2.54 mm · terminal + housing |
![]() |
Molex Mini50 | 1.80 mm | KR2021 | Automotive W2B · CPA car connector |
![]() |
Molex PanelMate | 1.25 mm | KR1253 | Panel-mount 1.25 mm · SMT wafer |
![]() |
Molex KK | 3.96 mm | KR3960 | KK 3.96 single row · housing + wafer |
![]() |
Molex Mini-Fit | 4.20 mm | KR4200 | Dual-row power W2W · 4.20 mm |
Cross-reference is indicative — final confirmation against your drawing and PCB pad layout within 24h.
Cannot find your part number?
Skip the search. Send the BOM and we will map every line item to a validated drop-in.
- Upload BOM (Excel / PDF / CSV)
- Engineer maps line items + flags risk
- Receive DFM report + quote in 24h
Upload BOM List →
NDA signed before files are opened.
The actual replacements — not a stock image
These are the real KR part numbers that ship against JST and Molex line items. Terminal, housing and wafer are tooled as a matched set, so the crimp height and PCB footprint stay inside the original window.

Friction lock · PCB pad & crimp window matched

PicoBlade class · single & dual row

TPA lock · 2.00 mm pitch

TPA · straight & right-angle DIP wafer

TPA W2B · latch retention matched

Top-entry W2B · 1.00–1.50 mm

Dual-row power · 3.00 mm pitch

CPA car connector · 1.80 mm
Form · Fit · Function — the only three tests that matter
A connector is a drop-in replacement only when all three dimensions are proven, not just the pin count. Every KONNRA alternative is released against a documented FFF dossier.
Form
The physical envelope must be indistinguishable from the original.
- Housing outline & keying geometry
- Contact pitch and row offset
- PCB pad layout, hole diameter, keep-out
- Material: LCP / Nylon 66, UL94V-0
Fit
It must mate with the existing counterpart without modification.
- Mating interface & latch/lock retention
- Insertion force within original window
- Wire gauge & crimp barrel compatibility
- No harness or assembly-line change
Function
Electrical and mechanical performance equal or better.
- Current rating & contact resistance
- Mating cycles and vibration endurance
- Operating temperature −40°C to +105°C
- Dielectric withstanding & insulation resistance
Where these parts are actually made
Tooling, moulding, stamping and assembly under one roof: 40+ sets of 50–150T precision injection machines, in-house progressive stamping dies, automated crimping and in-line CCD inspection. Photographed on the floor — every image below is our own equipment.











CNAS-accredited lab. 100% of production tested.
Not AQL sampling on the critical parameters — every lot is pulled through the full electrical and mechanical test matrix before it leaves the floor. Reports ship with the goods.
Three bases, one quality system
Dongguan — Tooling & Injection Base
In-house mold shop, precision molding, automation assembly. New tooling in 18–25 days.
Suzhou — Stamping & Plating Base
High-speed progressive stamping, selective gold/tin plating, reel-to-reel capability.
Vietnam — Assembly & Logistics Base
China+1 supply continuity, harness assembly and regional fulfilment for EU/US programs.
Already qualified where failure is not an option
Automotive, new energy and consumer robotics programs run KONNRA drop-in alternatives in series production — 30 million+ pieces shipped as direct replacements.

JST XH / PH alternatives for battery-management harnesses. Zero PCB redesign, PPAP-level documentation, dual-base supply for continuity.

Molex DuraClik and Clik-Mate replacements for cabin electronics. Full FFF dossier plus IATF-aligned PPAP accepted at first submission.

1.25 mm and 1.00 mm pitch alternatives for gimbal and battery connectors. Sub-millimeter tolerance control, 100% lot testing, NDA-covered tooling.




Send the drawing. Get a DFM review in 24 hours.
Tell us the original part number or upload the BOM — an application engineer reviews the footprint, mating interface and current rating, then returns a written DFM report with pricing and lead time.
- ✓
24-hour DFM review. Drawing-level feedback from a real connector engineer, not a sales auto-reply.
- ✓
Strict NDA by default. A mutual NDA is signed before any file is opened. Drawings, BOMs and project names are never shared, published or reused.
- ✓
Cross-reference report included. Every line item mapped, with risk flags for pin-1 orientation and latch geometry.
- ✓
Samples before commitment. Free engineering samples for qualified projects, 5–7 days door to door.
Request a Drop-In Quote
Attach your BOM or drawing — Excel, PDF, STEP and DWG accepted.
Questions engineers ask before switching
If your question is not here, put it in the form above — you will get an engineer’s answer, not a brochure.
Are KONNRA connectors a true drop-in replacement for JST and Molex?
Yes, when the FFF dossier confirms it. We measure the original housing outline, mating interface, latch geometry and PCB pad layout, then validate our part against them. For matched series (XH, PH, PA, DuraClik, Clik-Mate) no PCB or harness change is required. We always state clearly if a line item is a near-equivalent rather than a true drop-in.
Do I need to requalify my product after switching?
In most cases a documentation-level change is sufficient, because electrical and mechanical performance is equal or better and the footprint is unchanged. We supply the full test report pack (contact resistance, insulation resistance, dielectric withstanding, vibration, thermal shock) to support your internal change control and customer notification.
What is the minimum order quantity and lead time?
Standard series start from 5,000 pcs per part number. Off-the-shelf tooling ships in 7–12 days; new tooling takes 18–25 days from drawing approval. Engineering samples are available before you commit to volume.
How is my BOM and drawing data protected?
A mutual NDA is executed before files are opened. Documents are held on access-controlled servers, restricted to the assigned engineering team, and never used for any other customer or published. We can also work under your own NDA template.
Can you match a specific plating, colour or wire gauge?
Yes. Gold flash to 30 µin, tin, and selective plating are available; housing colours and keying options are tooled in-house. Crimp barrels are matched to your wire gauge and insulation diameter so the existing applicator setup keeps working.
What happens after I submit the form?
Within 24 hours an application engineer sends a DFM review: cross-reference table, any risk items, recommended part numbers, price breaks, lead time and sample plan. If something cannot be matched exactly, we tell you before you place an order.
One BOM. One engineer. One answer in 24 hours.
Send the list — we will come back with drop-in part numbers, a DFM report and pricing. Under NDA, with samples behind it.



