Home>IDC connectors>KR2543 single row DIP with buckle without corner 180° IDC connectors
  • KR2543 single row DIP with buckle without corner 180° IDC connectors

    Model number:KR2543

    Category:WIRE TO BOARD

    Pitch:2.54mm

    Circuits:2~16pin

    Wire AWG:22~26#

    Current:3A

    Similar models in the market:AMP 2.54 IDC connector

The Konnra KR2543 single row DIP with buckle without corner 180° IDC connector is suitable for dense electronic devices. Provides up to 3A for each contact in the American Wire Gauge (AWG) 26# and 3A for the AWG 26#, which means it can be used flexibly as chassis wiring with a maximum amperage of 0.5 amps. The maximum amperage is 0.09 amps.



With flexible design variants, the design saves space and saves a lot of PCB costs:
Side entrance: height is only 1.75mm
Depth is 3.9mm
Top entrance: height 3.9mm
Depth 2.2mm

Optimize transmission speeds and deliver superior signal characteristics.